After struggling for quite some time with our septic system, I realized there might be a problem with the way we were approaching various aspects of plumbing. For starters, we didn't think too much of putting things down the garbage disposal, which created some serious issues later on down the road. We were left struggling with drains that just didn't work properly, and so we started carefully considering ways to change things. We talked with a plumber about septic system maintenance, and they had some tips that improved our experience. Check out this website for awesome tips on managing septic tanks.
Are you have trouble with plumbing in your home, which is connected to a septic system? Poor septic system maintenance causes a lot of problems with the land around your home, as well as your household plumbing. The problems are often worse with old concrete tanks, which is why good inspection routines are important to prevent septic system failure. Here are some septic maintenance tips that will help with the inspection and repair needs to prevent failure with older systems:
1. Routinely Have Tank Pumped and Inspected
The biggest mistake homeowners make with caring for septic systems is not having the tank pumped when needed. Every few years, average sized septic tanks feel with solids and need to be pumped. Sometimes, excessive use and undersized systems need to have their tanks pumped more often. If the plumbing in your home is starting to backup or drain slowly, it is likely due to issues with the tank becoming full.
2. Watching Water Waste and Checking the Level in The Tank
Excessive use of water is a cause of serious problems with the septic system. It is important to watch your water consumption and the level in the tank. If you use appliances like washing machines frequently, this can cause excess water to overburden the tank; leading to problems with solids getting in outlets and connections. Consider reducing consecutive use of appliances that use a lot of water or grey water systems to prevent these problems.
3. Looking for Signs That There Is A Problem with Septic Drain Fields
The drain field is the area of septic systems where the liquid waste is filtered(percolated) through the ground. This is also an area where problems can start and go unnoticed, such as solids or old collapsed lines. If your tank seems to be filling up rapidly and constantly needing to be pumped, have a plumbing repair service inspect the drain field for problems.
4. Keeping an Eye on Concrete Tanks and Having Them Repaired and Upgraded
With older systems, concrete tanks are often the material that was used with the septic systems were installed. Concrete tanks can be durable, but they are often prone to problems with decay and may need to be repaired and upgraded when problems like cracks, leaks and damage inside the tank are discovered.
These are some septic maintenance tips to help you do routine inspections and repairs that prevent septic system failure. If your old septic tank is causing plumbing problems, contact a septic service and talk to them about options to improve your system. Visit a site, like https://www.blountsspeedyrooter.com/, for more help.
Share30 August 2018
